LED transparent screen maintenance method

1, keep the power supply stable, good grounding protection, do not use in bad natural environment (such as strong lightning weather);

2, the screen body is strictly prohibited to water, iron powder and other easily conductive metal.Transparent LED display screen should be placed in low dust environment as far as possible, large dust will affect the display effect, and too much dust will cause damage to the circuit;

3. When water enters due to various reasons, please cut off the power immediately and contact the maintenance staff until the display board inside the screen is dry.

4. If there is dust on the surface, please separate it from the vacuum cleaner and air gun (do not use dishcloth to clean directly and do not use force to prevent the screen from falling off);

5, usually maintain the use of vacuum cleaner, air gun facilities to remove dust.Do not use too hard or rough cloth or unclean cloth to wipe to prevent damage to the surface of the product;

6. It is recommended that the LED display should have a rest time of more than 2 hours per day, and be used at least once a week in the rainy season.Generally, the screen should be turned on at least once a month and be lit for more than 2 hours.

7. The LED display screen shall be checked regularly to see whether it works normally and whether there is any damage to the circuit. If it does not work, it shall be replaced in time.

8. When playing, do not leave the screen all bright for a long time, such as all yellow, all red and all green, so as to avoid excessive current, excessive heating of power cord, damage of LED lamp and influence on the service life of the display screen.Do not disassemble at will, splice the screen body;

9. If the internal circuit of LED display fails, non-professionals are forbidden to touch it to avoid electric shock or damage to the circuit;If there is a problem, ask a professional to repair it.

In addition, the daily maintenance of LED transparent screen is also very important. Dust accumulated on the screen is cleaned regularly to avoid affecting the cooling function.In the broadcast of advertising content, try not to be in the full white, full clear color screen for a long time, so as not to cause current amplification, cable heating and short-circuit and other faults.During the festival, the screen brightness can be adjusted according to the ambient brightness, which can not only save energy, but also extend the life of LED display.